User manual

If you have two TeraStations, then you may

congure one to replicate all data in a folder on

the other. Any changes to les in a share on

the Source TeraStation will be duplicated in a

backup folder on the Target TeraStation.

To congure replication, connect both

TeraStations to a network, or connect an open

Ethernet port on the Source TeraStation to an

Ethernet port on the Target TeraStation.

Open the Web Admin Tool for the Source

TeraStation and navigate to System/Backup/

Replication. Click Add.

Replication

Select the source and destination folders for replication and click Save.

Note: When replication is rst congured, existing les are not immediately copied from Source

to Target until a new le is created locally, or Resynchronization is clicked in System /Backup/

Replication of the Web Admin Tool. Remote additions to the Source folder by Backup and

WebAccess are also not replicated until a le is added locally to the Source folder, triggering the

synchronization, or Resynchronization is clicked. With rmware 1.01 or later, remote additions to

the source folder via FTP or FTPS are synchronized immediately.