Setup guide

10
The LinkStation name is
used to name and identify the
LinkStation. A friendly, easy name
is recommended. Enter a suitable
name in the ‘
LinkStation Name’
fi eld. Feel free to use your fi rst or
last name, a description of the data
to be installed on LinkStation, or simply name it LinkStation. Enter a
short description of LinkStation in the ‘
LinkStation Description’ fi eld.
Once completed, press the ‘
Apply’ button. NOTE: After changing the
LinkStation name, you may be required to re-locate the network share
by following the instructions on Page 4 or Page 6.
By default there are two
shares on LinkStation. If
you would like to create
additional shares for
specifi c users or specifi c
types of data, then click
on the ‘
Security’ tab.
Then click on the ‘
Shared
Folder Setup
’ link. From
this confi guration page
you can add new shares or edit existing shares. Press the ‘
Add a New
Folder
’ button to begin creating a new shared folder.
To begin setting up a new
share, enter an appropriate
share/folder name in the
‘
Shared Folder Name’
fi eld. Enter a description
of the share in the ‘
Shared
Folder Description
’ fi eld.
It is recommended to leave
the remaining settings in
their default state. Please
refer to the User Manual
on the LinkNavigator CD-ROM before changing any of these additional
settings. Press the ‘
Apply’ button when fi nished. Please repeat this
step to create additional shares.
General LinkStation Confi guration