Instruction Manual

Bualo Filter Turbo Auto-Sense™ Operators Manual: Page 10
2.1 System Controls
e Turbo Auto-Sense™ LCD control display is user-friendly and completely interactive, allowing
for easy to understand use (as displayed on the LCD screen).
Key Pad Diagram:
e following items are important for the operation of your system
POWER ON/OFF
e main power switch is located on the rear panel of your smoke evacuator. is switch
completely enables and disables the main power.
When the unit is powered on the
following LCD screen will appear.
Aer inserting a lter a screen will
ash for a few seconds to indicate
lter type and original life.
Next, the standard screen will appear
which displays information regarding
the units current activity.
MOTOR ON/OFF
e Motor ON/OFF button is located on the LCD key pad (Figure 1). is button turns the motor
(for suction) on and o.
SUCTION CONTROL
e amount of suction may be adjusted using the UP or DOWN arrow buttons located on the key
pad (Figure 1). It is recommended that you select the lowest suction setting that eectively clears
the operative eld of surgical smoke.
Operating Instructions
Section 2.0