User`s guide

30 007-4403-003
2: System Setup
Note: All SDI video complies with SMPTE 259M specifications.
Genlock/Composite Connectors
Table 2-12 describes the GENLOCK/COMPOSITE connectors.
Audio Connections
The MSB-REARPANEL rear panel provides AES/EBU and analog connectors. Their
capabilities are described in the following subsections.
AES/EBU Audio In Connectors
Table 2-13 describes the AES/EBU audio input connectors.
Table 2-12 GENLOCK/COMPOSITE Connectors
Connector Description
IN This connector is the Genlock video input for the PCI-VIDAUD-MSB-B card. This
composite analog signal should contain either NTSC or PAL Blackburst, generated
by a standard video sync signal source.
THRU This connector is an active loopthrough output of the Genlock input. This connector
may be terminated if desired. A maximum of four loopthroughs are allowed.
MON This connector is an analog duplicate of the SDI video output of the
PCI-VIDAUD-MSB-B card. The output supplies a monitor-quality signal not
designed for broadcast.
Table 2-13 AES/EBU Audio Input Connectors
Connector Description
1/2 This connector is an AES/EBU digital audio input for channels 1 and 2 of the
PCI-VIDAUD-MSB-B card. The input accepts two discrete channels of digital audio
conforming to the SMPTE 276M standard.