User`s guide

Video/Audio Connections
007-4403-003 29
Figure 2-2 depicts the left-half, rear view and shows a single ACTIVE THRU SDI
connector. As with the front of the panel, the rear halves are identical.
Figure 2-2 MSB-REARPANEL-B Left-Half Rear View
Video Connections
The MSB-REARPANEL provides SDI and GENLOCK/COMPOSITE video connectors.
SDI Video Connectors
Table 2-11 provides a description of each SDI video connector.
Table 2-11 SDI Video Connectors
Connector Description
IN This connector is the video input for the PCI-VIDAUD-MSB-B card. The input may
contain a maximum eight channels of embedded digital audio conforming with the
SMPTE 272M standard.
OUT1 This connector is video Output 1 for the PCI-VIDAUD-MSB card. The output may
contain a maximum eight channels of embedded digital audio conforming with the
SMPTE 272M standard.
OUT2 This connector is a second video output. The output may contain a maximum eight
channels of embedded digital audio conforming with the SMPTE 272M standard
ACTIVE
THRU
This connector is located on the backside of the rear panel. This connector is an
active-loopthrough video output of the input.
The active-loopthrough mode does not process the video through the
PCI-VIDAUD-MSB-B card and the video is only reclocked within the
MSB-REARPANEL-B before output.
CABLE
ACTIVE THRU