User`s guide

6 007-4403-003
1: Overview of the SGI Media Server
The following control interface modules are provided:
The Video Disk Communications Protocol (VDCP). This control protocol provides
control of VST over RS-422. The VDCP interface module supports back-to-back play
and record (subject to restrictions imposed by the video I/O port capabilities).
The Sony RS-422 VTR (also called, 9-pin or P2) protocol. VST supports this protocol
through a full-featured VTR deck-emulation mode that includes frame-accurate
insert editing and a variable-speed shuttle.
Multiport Video Computer Protocol (MVCP) defined by SGI. This control protocol
provides full-featured control of VST through TCP/IP. This control interface
module supports archive management, multiple-unit control, and event monitoring
and provides access to advanced features of SGI devices.
Storage Device Interface Module
Storage device interface modules provide access to the storage systems on which the clip
cache resides. Currently, there is a storage device interface module for the IRIX XFS
filesystem.
Media Device Interface Module
Media device interface modules provide access to the ports over which the media is
played and recorded (that is, the media ports). Each type of I/O port typically has its own
media device interface module.
VST has media device interface modules for the following:
PCI-VIDAUD-MSB-B is the DVCPRO 25, DVCPRO 50, DVCAM, and MPEG-2
multiformat video and audio codec for PCI backplanes.
PCI-VIDAUD-MSB-C is the DVCPRO 25, DVCAM, DV (16-bit/48 Khz only), and
MPEG-2 multiformat video and audio codec for PCI backplanes.
PCI-VIDAUD-MSB-IMX is the DVCPRO 25, DVCPRO 50, DVCAM, IMX, and
MPEG-2 multiformat video and audio codec for PCI backplanes.
PCI-VIDAUD-MSB-IMX-C is the DVCPRO 25, DVCPRO 50, DVCAM, DV (16-
bit/48 Khz only) , D10/IMX, and MPEG-2 multiformat video and audio codec for
PCI backplanes.
Diaquest (limited support): direct Sony RS-422 control of videotape decks.