User`s guide

The Clip Manager
007-4403-003 161
Note: The mcclips program writes its log messages to the window from which it is
invoked.
If the -v option is omitted, all messages with a severity level of Info and above are
written to the log. If this option is present, loglevel, which can be a positive or negative
number, identifies the minimum level of the messages that are written to the log.
The Clip Manager is displayed in a separate window, which is shown in Figure A-7. The
window shows the clips that are on the server. For each clip, it shows the name, the
duration, and the format. (If the duration contains an ‘*’ it means that no material has
been recorded in the clip.)
Error -3 Problem that needs correcting but does not require immediate action
Warning -2 Possible problem but could be a transient problem that corrects itself
Notice -1 Condition that might require attention, but is not an error condition
Info 0 Informational message
Debug
n
n
Informational message that normally is of use to engineers for
debugging; may be Debug1, Debug2, or Debug3, with Debug3
producing the most debugging information
Table A-3 Log Severity Levels (continued)
Priority
Log
Level Description