User`s guide

The Media Contro Panel

007-4403-003 155

• You can use the following deck control function buttons:

Review Review the speciﬁed edit. After the edit is ﬁnished, you can use this

option to examine the ﬁnished edit.

Capture Perform a frame-accurate recording from the selected portion of a

loaded and cued source tape to the clip currently loaded. For more

information about recording, see “Recording From the Deck to a

Clip” on page 157.

Rehearse Practice the speciﬁed edit. The decks go through all the mechanics

of a real edit except that the edit is not recorded.

Lay Down Perform a frame-accurate recording from the selected portion of the

clip on the SGI Media Server to the destination VTR. For more

information, see “Recording From a Clip to the Deck” on page 158.

• The current frame display is initialized to the cue in point each time the clip is cued.

As the clip is played or recorded, the display changes to indicate the current frame

number.

• The function display shows the current function.

• The edit status display shows the status when performing an automated edit (that

is, a capture, review, lay-down, or rehearse). The status may be one of the following:

CUE System is searching for the cue point.

SYNC System is doing a preroll.

LOCK The deck transport is locked.

EDIT The edit is in progress.

DONE The edit is complete.