User`s guide

116 007-4403-003
9: Introduction to MVCP
Editing at the Frame Level
The following MVCP commands manipulate the frames within a clip that is already
loaded in a unit:
FRM Removes a frame. In film, the equivalent is cutting out frames of film
and splicing the two parts of the film back together.
FRM unit-name in-frame out-frame
FCLR Changes (clears) a frame to black but does not remove it.
FCLR unit-name in-frame out-frame
FNEW Inserts a black frame into the clip.
FNEW unit-name in-frame out-frame
FOVR Moves frames from one part of a clip and overwrites frames in another
part of the clip.
FOVR unit-name source-in source-out dest-in
FINS Moves frames from one part of a clip and inserts them in another part of
the clip.
FINS unit-name source-in source-out dest-in
Displaying Your Logo
You can use the MVCP SET command with the following controls to display your
company logo, or any image, when the video port is not playing a clip:
vtr.media.output.idle_mode idle-mode
vtr.media.video.output.image.type image-type
vtr.media.video.output.image.name image-name
Place image files in directory /usr/vtr/data/images.