User`s guide

Working with Segments
007-4403-003 83
When a segment from a source clip is removed (FRM), the segments before and after the
copied segment are joined. The FCL operation is not supported by the
PCI-VIDAUD-MSB-B codec.
Figure 6-3 Copying Versus Linking; Where Segment Data is Stored
Listing Segments in a Vclip
To display pertinent information about the segments in a vclip, use the CSLS command:
CSLS [ clip-name [ track-mask [ in [ out ]]]]
clip-name Specifies the name of the clip you are interested in. If clip-name is not
specified, the most recently opened or created clip is used.
track-mask Must be an asterisk (*).
in Displays information about segments beginning after this (timecode)
point in the vclip. If in is not specified, the information displayed begins
with the first segment in the vclip.
out Displays information about segments before this (timecode) point in the
vclip. If out is not specified, the information displayed ends with the last
segment in the vclip.
Source clip
Representation
of virtual clip
Source clip
Representation
of virtual clip
LinkCopy
In point
Out point
In point
Out point
In point
Out point