Full Product Manual

* Ozonator and circulation pump can be combined on the same output via the optional
splitter PP1.
This table shows typical connections. OEMs may have a different connection scheme.
DIRECT OUTPUT 1
(A0 / Floating connector) (in.ye-5 only)
Voltage 120 V 240 V
Green / ground P47 P47
Black / line P32 P32
White / common P56 P67
PUMP 1 A3
Voltage 120 V 240 V
Green / ground P49 P49
Black / low speed K2-P K2-P
Red / high speed K4-P K4-P
White / common P58 P69
PUMP 2 A2
(in.ye-5 only)
Voltage 120 V 240 V
Green / ground P50 P50
Black / low speed K6-P K6-P
Red / high speed K3-P K3-P
White / common P59 P70
PUMP 3 A4
(in.ye-5 only)
Voltage 120 V 240 V
Green / ground P48 P48
Black / line K6-P K6-P
White / common P57 P68
CIRCULATION PUMP* A1
Voltage 120 V 240 V
Green / ground P51 P51
Black / line K1-P K1-P
White / common P60 P71
PUMP 2 A2
(in.ye-3 only)
Voltage 120 V 240 V
Green / ground P50 P50
Black / low speed K2-P K2-P
White / common P59 P70
LIGHT 12 V AC, 1A MAX.
Always on P34
Relay P35
CONNECTING HIGH VOLTAGE ACCESSORIES: ALL MODELS
Two options are available with Y Series hot tub packs for connecting high voltage accessories: 0.250” quick-connect terminals,
or AMP connectors conform to industry standards.
CONNECTING HIGH VOLTAGE ACCESSORIES: NORTH AMERICAN MODEL IN.YE
For the connection to the 0.250 inch terminals, the high voltage accessories must be provided with female quick connect termi-
nals, straight and non-insulated for all types of connections, including the ground. Accessories of 120 V or 240 V may be connected
to the corresponding terminals of the printed circuit of the in.ye. Refer to the following tables for correct connections. Note that all
female terminals must be correctly and completely seated on the printed circuit terminals for proper current ratings.
CONNECTIONS
WIRING DIAGRAM  W3000
36