Full Product Manual

EASY 4
COMPACT FULL-FUNCTION KEYPAD
The Quick Reference Card provides an overview of your hot tub’s main functions and the operations accessible from your
digital keypad. This QRC depicts a generic overlay, custom versions may vary.
Set PointSmart Winter
Mode
Heater
Filter
Up
Light
Pump 1
Pump 1 Pump 2 Up/Down
DownIndicator
lights
1 PUMP MODEL
Pump 1 Pump 2 Up/Down
Up / Down
Light
Pump 2
Pump 1
2 PUMP MODEL
HOT TUB FUNCTIONS
PUMP 1
Press Pump 1 key to turn Pump
1 on at low speed. Press a
second time to turn pump to
high speed (with a dual-speed
pump*). A third time turns
pump off. A built-in timer
automatically turns pump off
after 20 minutes, unless pump
has been manually deactivated
first.
The “Pump 1” indicator
lights up when Pump 1 is on.
With a dual-speed pump, the
indicator will flash when pump
1 is on at low speed.
* If single speed pump: press Pump key to turn pump on. Press Pump
key again to turn pump off.
OFF MODE
Pressing Pump 1 for 5 seconds
will enable the Off mode. This
mode allows you to stop all
outputs including automatic
functions such as filter cycle,
heat request and smart winter
mode for 30 minutes to perform
quick hot tub maintenance.
When Off mode is active, the
display will toggle between the
“OFF” message, the clock and
the water temperature.
The hot tub light will flash for
a few seconds before the end
of the 30 minutes to warn you
that the system is about to
resume its normal operation.
Press Pump 1 or Pump 2 (if
available) to restart the system
before the expiration of the 30
minute delay. When the system
resumes its normal operation,
the display shows “On“ for 3
seconds.
PUMP 2 KEY
Not available on all models
Press Pump 2 key to turn Pump
2 on at low speed. Press a
second time to turn pump to
high speed (with a dual-speed
pump*). A third time turns
pump off. A built-in timer
automatically turns pump off
after 20 minutes, unless pump
has been manually deactivated
first.
The “Pump 2” indicator lights
up when Pump 2 is on. With a
dual-speed pump, the indicator
will flash when pump 2 is on at
low speed.
LIGHT KEY
Press Light key to turn light on.
A second press turns light off.
A built-in timer automatically
turns light off after 2 hours,
unless it has been manually
deactivated first.
The “Light” indicator lights up
when light is on.
UP/DOWN KEYS
Use Up or Down key to
set desired water temperature.
The temperature setting will
be displayed for 2 seconds to
confirm your new selection.
2 pump hot tubs have a
combined Up/Down key. Hold
the button to increase the pa-
rameter and release the button
to stop. Hold the button again
to decrease the parameter.
The "Set Point" icon indicates
that the display shows the
desired temperature, NOT the
current water temperature!
USER INTERFACE  EASY 4
Indicator
lights
24