Full Product Manual
INITIAL INSTALLATION
18
Electrical preparations:
A clearly labeled emergency switch shall be provided as part of the installation. The switch shall be readily accessible to the
occupants and shall be installed at least 5 feet (1.52 m) away, adjacent to, and within sight of, the unit.
Before installation the hot tub, the ellectrical system has to be prepared, as detailed in the below table.
Applicable cable:
Copper 90°C (194°F)
THHN/THWN
Ampere rating of the supply circuit
overcurrent protective
AWG rating of the supply conductor
mm2
Atlanta 30 A 6
Boston 50A 6
Jersey 50A 6
Chicago 40A 6
New York 40A 6