Technical data

Installation

SU54/5, SU80/5, SU100/5 – 6 720 808 532 (2013/08)12

Installing aquastat

▶ Remove cover from the aquastat. To do so, undo the screw on the top.

▶ If necessary, remove any unnecessary attachments. Attach bracket

[3] to aquastat [2] by means of two self-tapping screws [1].

Fig. 14 Attaching the aquastat to the bracket

[1] Self-tapping screws

[2] Aquastat

[3] Bracket

▶ Feed the temperature sensor [4] with the compensating spring [3]

into the sensor well [5].

▶ Attach bracket [6] to DHW tank by means of 4 self-tapping sheet

metal screws [1].

▶ Replace the cover of the aquastat [2].

Fig. 15 Installing aquastat

[1] Self-tapping screws

[2] Aquastat

[3] Compensating spring

[4] Temperature sensor

[5] Sensor Well

[6] Bracket

Installing B-kit components

Fig. 16 Installing B-kit components

[1] Tee 1" x 1" x ¾ " (2x) with P&T safety valve

[2] Cap ¾ " for recirculation connection

[3] Bracket with aquastat

[4] Tee with fill and drain valve

6 720 800 155-03.1ITL

6 720 800 155-04.1ITL

2 1

6 720 801 769-04.1ITL