Operation Manual

Product description

Logano G615 - We reserve the right to make technical changes without notice!

2 Product description

The oil/gas fired boiler Logano G615 has been

developed and built employing the latest technologies

and safety regulations.

Particular emphasis is placed on ease of operation.

Please observe the safety instructions and the operating

instructions to ensure safe, economical and

environmentally-friendly operation of your system.

The main components of the Logano G615 oil/gas fired

boiler are:

•Boiler block (Æ Fig. 1, [3])

The boiler block transfers the heat generated by the

burner to the heating water.

• Boiler shell (jacket Æ Fig. 1 and 2, [1]), thermal

insulation (Æ Fig. 1, [2]).

The boiler jacket and thermal insulation prevent energy

loss.

• Control panel (Æ Fig. 1, [4])

The control panel is designed to monitor and control all

electrical components of the oil/gas fired boiler

Logano G615.

Fig. 1 Oil/gas fired boiler Logano G615

1 Boiler shell (jacket)

2 Thermal insulation

3 Boiler heat exchanger

4 Control Panel

Fig. 2 Front jacket

1 Boiler shell (jacket)

2.1 Correct use

The Logano G615 is designed for heating boiler water

and indirect DHW heating. Any other purpose is

considered improper use. Any resulting damage is

excluded from the manufacturer's warranty.

The Logano G615 can be operated with oil, gas, and

combination burners. For a list of the approved burners,

please contact Bosch Thermotechnology Corp.

This boiler can be operated with Aquastat, the

Logamatic 4000, and other control systems.

2.2 Certification and testing mark

This appliance has been tested and certified and meets all

applicable standards for the US and Canadian markets.

6 720 642 625-51.1o