Installation Instructions

13
System inspection and maintenance
Logano G615 - Subject to technical modifications
52
13.7 Inspection and maintenance logs
The inspection and maintenance logs provide an overview of the required inspection and maintenance work.
B Initial and date the inspection operations completed.
The inspection and maintenance logs can also be used as templates.
Inspection work Page Date:____________ Date:____________
1. Check general condition of heating system
2. Visual inspection and function check of the heating
system
3. Check fuel and water-carrying components of the system
for:
• Leaks during operation
• Visible signs of corrosion
• Signs of aging
4. Check the combustion chamber and heating surfaces for
contamination. Shut down the heating system first.
Æ 48
5. Check the burner ( Æ burner documentation)
6. Check the flue gas and venting system for proper
operation and safety (see
Æ burner documentation)
7. Check the operating pressure and inlet pressure of the
diaphragm expansion vessel for heating systems
Æ 51
8. Check the function of indirect-fired water heater tank and
anode rod (
Æ tank documentation)
9. Check the control panel setting (see Æ control panel
documentation)
10. Record the final checks of the inspection work, incl.
measurements and test results
Confirm professional inspection
Company stamp/
signature
Company stamp/
signature
Tab. 15 Inspection log
If during inspection work conditions are identified that require additional service and maintenance, perform
this work on an as-needed basis. If make-up water is added, the quality of this water must correspond to the
specifications in the enclosed operating manual.