Installation Instructions

9
Installing the control panel
Logano G515 – 6 720 647 208 (2014/09) 33
Fig. 63 Making the electrical connections
▶ Connect the electrical cables as shown in the wiring diagram. Take
care to ensure proper cable and capillary tube routing.
▶ Insert cable strain relief with cable inside into the frame and secure
by closing the lever ( Fig. 64, [1]).
Fig. 64 Fastening the connecting cables
▶ Engage the lower hook of the rear panel (Logamatic 43xx) with the
frame at an angle and tilt upward until the upper hooks engage with
the side panels ( Fig. 61, [2]).
▶ Put the top cover in place ( Fig. 60, [1]) and tighten the screws
( Fig. 65).
Fig. 65 Boiler with fitted control panel
Secure all cables with cable strain reliefs.