Technical information

Transportation and Placement 5

We reserve the right to make any changes due to technical modifications!

Installation and Maintenance Manual Logalux LT135/2 – 300/2 • Issue 2013/08

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

5.2 Moving the Tank Unpackaged

You can easily move the tank when you attach three car-

rying pipe stubs (not supplied) to the tank.

z Remove the 4 front panel screws (Fig. 5).

z Remove front panel. Pull the front and bottom of the

panel back.

z Remove insulating ring.

One carrying pipe stub (¾NPT) for the front of the

tank

z Screw a ¾“ coupling on a pipe end (Fig. 6, Item. 1).

z Tread coupling on front clean-out cover.

Two carrying pipe stubs (1“ NPT) on rear side of

tank

z Screw two 1“ coupling on two pipe ends (Fig. 7,

Item. 1).

z Screw carrying pipe stubs on boiler coil connections.

Fig. 5 Remove front cover

Fig. 6 Assembly of front carrying pipe stub

NPT¾

Fig. 7 Assembly of rear carrying pipe stubs

VS/RS RS/VS