Technical information

TableofContents
3
We reserve the right to make any changes due to technical modifications!
Installation and Maintenance Manual Logalux LT135/2 – 300/2 s Issue 2013/08
Buderus Heiztechnik GmbH s http://www.heiztechnik.buderus.de
1 General Information ..........................................4
1.1 Standards and Guidelines ......................................4
1.2 Tools, Materials and Test Equipment ...............................4
2 Safety Considerations.........................................5
2.1 Intended use ..........................................5
2.2 Guideline of Notices ..........................................5
2.3 Observe the following Notices ...................................5
2.4 Waste Disposal .............................................5
3 Product Description ..........................................6
4 Technical Information .........................................7
4.1 Dimensions and Connections ....................................7
4.2 Safety Standards ............................................7
5 Transportation and Placement ..................................8
5.1 Moving the Tank on the Pallet ....................................8
5.2 Moving the Tank Unpackaged ....................................9
6 Tank Installation ............................................10
6.1 Placement of the Tank........................................10
6.2 Installation of Water Piping .....................................11
6.3 Installation of Temperature Sensor/Aquastat ..........................12
6.4 Checking the Magnesium Anode Connection .........................12
7 Putting the Tank in/out of Operation .............................13
7.1 Putting the Tank in Operation ...................................13
7.2 Operating Notice ...........................................14
7.3 Taking out of Operation ......................................14
8 Maintenance ...............................................15
8.1 Preparing the Tank for Maintenance ...............................15
8.2 Cleaning the Tank ..........................................16
8.3 Checking Anode Operation.....................................16
8.4 Changing out the Anode ......................................18
8.5 Placing the Tank Back in Operation after Cleaning ......................19