Specifications

Logamax plus GB142 applications manual | 01.2012
Technical specifi cations are subject to change without prior notice
20
|
GB142 Applications Manual
The EM10 Module allows interfacing a single boiler with a
Building Management System (BMS) for temperature or output
setpoint control. The EM10 also has a dry set of N/O and N/C
contacts that can be used to trigger a system alarm.
Features of the EM10:
• Run single boiler based on BMS input 0-10V signal for
temperature or output setpoint control
• Input: 0-10V
• Common fault dry contact output NO/NC
• 120V supply
Fig.15 EM10 0-10V BMS Interface Module
2.5 0-10V BMS Interface & Common Fault Module EM10