Operating Instructions

Modules and their functions
9
Logamatic 4323 - Technical specifications are subject to change without prior notice.
65
9 Modules and their functions
All modules are shown here that are or can be installed
in your Logamatic 4323 control panel.
O = basic equipment
X = optional extra
Along with the ZM433 central module, which is part of
the standard equipment level of the Logamatic 4323
control panel, most function modules used, i.e. FM441
and FM442 function modules, will be described on the
following pages.
Control panel
Logamatic 4323
Modules
MEC2 remote control O
CM431 controller module
O
ZM433 central module
Supply for external heat production + heating zone
O
FM441 function module
Heating zone + DHW
X
FM442 function module
2 heating zones
X
FM443 function module
Solar circuit
X
FM445 function module
LAP/LSP (primary system)
X
FM448 function module
Central fault message
X
FM456 function module
Cascade – 2 wall mounted boilers
X
1)
FM457 function module
Cascade – 4 wall mounted boilers
X
1)
FM458 function module
Strategy module
X
1)
Tab. 2 Standard equipment level and optional modules
1)
May only be connected to control panel 1 (address 0 or 1).
The MEC2 preset menus in these operating instructions
relate to these modules.
All other modules are explained in separate technical
module documentation.