Technical data

Installation and servicing instructions for wall-mounted condensing gas boiler Buderus 600 - 11R/19R/24R • 02/2006 17
Subject to modifications resulting from technical improvements! Buderus • http://www.buderus-domestic.co.uk
Installation 1
1.4 Items supplied with unit
z Check the contents against the packing list to ensure
that no parts are missing.
Key to fig. 1:
item 1: Wall-mounted condensing gas boiler
item 2: Wall bracket
item 3: Technical documents
item 4: CH Flow connection pipe
item 5: CH Return connection pipe
item 6: Gas service valve
item 7: Plastic bag containing the following accessories:
2 x wall fixing-screws
2 x wall plugs
2 x washers
Seals (2 x ¾“)
Square wrench
Initial start-up sticker
Second identification plate
1.5 Hanging the boiler
The boiler is transported in a horizontal position.
z Open the box and remove the four foam supports
(fig. 2, item 1). The casing is not attached to the
boiler.
z Take out the casing (fig. 2, item 2) and put aside
during installation.
z Hang the wall mounting template.
z Drill the necessary holes.
z Take out the wall bracket (fig. 1, item 2) and attach to
the wall using the wall mounting template.
z Take out the condensing gas boiler (fig. 2, item 3)
and hang onto the wall bracket (fig. 3).
z Dispose of packaging.
Fig. 1 Items supplied with unit
1
2
3
7
4
6
5
Fig. 2 Unpacking the box
1
2
3
CAUTION!
CAUTION!
Do not carry the boiler by the casing at
any time.
Fig. 3 Installation