User's Manual

Reset:
If the device stops responding, it can be restarted by pushing the Reset Button. A non-metallic pin should be used to push the reset
button.
None of the stored parameters are affected.
WARNING ʹELECTRICAL SHOCK HAZARD
x Use only the plastic (non-metallic) pin provided with the device to press the reset
button.
x Never use a metallic pin to press the reset button.
Communication:
The Budderfly RF Multi-Way Switches use the radio frequency to communicate with the Budderfly RF plugswhich use the power
line to communicate wiƚŚƚŚĞ&ĂĐŝůŝƚLJŽŶƚƌŽůůĞƌ
The switches can reply to the following commands:
x Direct Turn On/Off command: the switch will turn the connected load On/Off.
x ^ĞƚƐůĞĞƉdŝŵĞĐŽŵŵĂŶĚƐĞƚƐƚŚĞĚĞǀŝĐĞƐůĞĞƉƚŝŵĞ
Specifications:
Power: 120V - 277V AC/ 60Hz
Maximum Loads:
x 120VAC, 60 Hertz:
o 1600W for Tungsten
o 1400W for Electronic ballast
o 800W for Standard ballast
x 277VAC, 60 Hertz:
o 3300W for Electronic ballast
o 1200W for Standard ballast.
x RF Operating Range:
o 8 meters
x Battery:
o 3V- 2 x 1.5V AAA Energizer Ultimate Lithium
x Frequency:
o 915Mhz
Neutral Line: NOT Required
Operating Temperature: 10
c
o to +40
o
C
Certification: UL certification is in progress
For indoor use only
Specifications subject to change without notice due to continuing product improvement.