Installation Guide

Page 14
INSTALLATION
OF LOGS FOR
HEPPLEWHITE
MODEL C100BA(LP)
MODEL C100BA(NAT)
1. Carefully insert logs though
opening in top of unit, placing logs
on base as described on ( Page 15,
figure 15).
2. After placing logs on base, light
heater making sure no logs are
contacting flames, if so, then turn
flame off. Reposition any log
contacting flames so there is no
contact with flame. Relight and
check once more. If correct, turn
flame off.
3. Place the top grate on unit as
shown. (See Figure 14).
FIGURE 14 - INSTALL TOP GREAT
TOP GRATE