Installation Guide

Page 22
Continued Reinstalling Room Heater In ZC Cabinet
5. Next reconnect the heater power cord to the ZC cabinet receptacle.
6. Replace the Right Side Trim using the three (3) 5/16" screws.
7. Then replace the Top Front Trim using the seven (7) 5/16" screws.
MODELS 51,T-51,74 or T-74 ROOM HEATERS AND MODEL 51ZC
CABINET IDENTIFICATION
(See Figures 16 & 17 For Additional Identification)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(23)
(12)
(13)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(24)
(25)
(26)
(27)
(28)
(29)
(30)
(31)
(32)
1. 6" Flue Exit
2. Hot Air Vent
3. Top Fire Brick
4. Air Wash
5. Side Brick
6. Outside Trim
7. Door Handle
8. Brass Spring
9. Door Rope
10. Hearth
11. Rheostat
12. Door
13. Glass Clips
14. Second Air Intake
15. Combustion Air Supply Handle
16. Access Cover Door
17. Thermostat
18. Top Front Trim
19. Motor
20. Left & Right Front Trim
21. Bottom Fire Brick
22. Secondary Air Tubes
23. Power Cord
24. Top Outside Trim
25. Glass & Logo
26. Brass Hinge Cap
27. Hinge Pins
28. Hinge Block
29. Optional Side Close Clear-
ance Heat Shield
30. Hearth Brass
31. Left & Right Outside Trim
32. Access Cover Mounting
Screws
FIGURE 18