Instruction Manual

Chemometrics
NIRCal 5.5 Manual, Version A 261
3.21.42 View Fit
The current plot is resized in such a way, that all objects are inside the visible region.
If you have applied a visibility (e.g. calibration set) to the view, it is possible that certain objects not
contained in that set (e.g. validation spectra) will not be visible.
3.21.43 Visibility
Restrict the visibility of the objects displayed in the plot to the chosen set.
REMARK: no data will be changed or deleted by this action.
NOTE
Use the shortkeys Ctrl+0,Ctrl+1,...,Ctrl+7 to change between the sets. The visibility set is shown as
subtitle in the plot.
3.22 Toolbar
3.22.1 Calibration Toolbar
Updates opened views and recalculates,
Changes Calibration Method to Multiple Linear Regression
Changes Calibration Method to Principal Components Regression
Changes Calibration Method to Partial Least Squares
Changes Calibration Method to Cluster
Changes Calibration Method to SIMCA
Changes Validation Method to Validation Set
Changes Validation Method to Cross Validation
Opens Dialog Box to Edit Data Sets
Opens Dialog Box to Edit Cross Validation Groups
Creates a spectra selection
Creates a wavelength selection
Creates a property selection
Opens Dialog PCs Selection Wizard (Factor)
Opens Dialog to edit Calculation Parameters
Opens Dialog to edit Blow Up Parameter
Opens Dialog for Outlier Detection
Calculates Q-Value and shows Protocol
Opens Dialog Box for the Calibration Wizard
Shows the saved Calibration Protocol