Instruction Manual

6 Operation

31 Melting Point M-565 Operation Manual, Version D

• Turn the rotary knob to

select a method.

• Press START to start the

determination.

• Use Edit to adjust method

parameters.

• Press the Options key to

get further functions:

• New: Creates a new

method.

• Delete: Deletes the

method.

• Rename: Changes the

method name.

6.2.5 Adjusting parameters during a determination

NOTE

Measuring parameters can be modiﬁed during preheating or a determination. This function is

possible only if enabled by the setting “Param. adj. during meas.” (see 6.5).

• Turn the rotary knob to

display the current param-

eter set.

• Adjust the parameters by

pressing Edit. Adjusting the

parameters does not affect

the saved method.

If the temperature gradient

is changed during a mea-

surement, the result shows

CHANGED (a) for the tem-

perature gradient.

6.2.6 Printout

NOTE

The result is printed out automatically if a printer is connected and automatic printing is conﬁgured in

the settings menu.