User Manual

6 Operation
23 Melting Point M-560 Operation Manual, Version D
6.2.2 Determination without pre-registered melting point method
• Choose the menu for melting point determination.
• Make sure that all samples are removed.
• Press START to begin the determination process immediately with the last parameters used. They
always remain saved in the instrument and are indicated in the green field in the lower part of the
screen.
NOTE
If the current parameters do not meet your requirements, press Edit and set start temperature, stop
temperature, and temperature gradient.
a b c
d
a Start temperature
b Stop temperature
c Temperature gradient
d Edit
• To adjust the desired melting parameters,
press Edit.
• Chose start temperature
with the rotary knob, and
press Next.
• Chose stop temperature
with the rotary knob, and
press Next.
• Chose temperature
gradient with the rotary
knob, and press Save.
NOTE
Insert samples only when the start temperature is reached (as soon as prompted).