Instruction Manual

6 Operation

47 B-290 Operation Manual, Version I

6 Operation

This chapter gives examples of typical instrument applications and instructions on how to operate the

instrument properly and safely.

Danger

Death or serious poisoning by inhalation or incorporation of dried particles during spray process.

• Wear safety goggles

• Wear safety gloves

• Wear a suitable protective mask

• Wear a laboratory coat

• Check for proper sealing before use

• Do not inhale dried particles

• Stop drying gas ﬂow before opening the drying circuit

Warning

Death or serious poisoning by contact or incorporation of harmful substances at use.

• Before operation, check the instrument for correct assembling

• Before operation, inspect sealings and tubes for good condition

• Exchange worn out or defective parts immediately

• Exchange clogged ﬁlters immediately

• Only operate the instrument in ventilated environments

• Directly withdraw released gases and gaseous substances by sufﬁcient ventilation

• Perform a dry-run without sample material and check for gas leakages