Instruction Manual

10 Spare parts
52 E-812/816 Hot Extraction Operation Manual, Version B
10 Spare parts
This chapter lists spare parts, accessories, and options including their ordering information.
Order the spare parts from BUCHI. Always state the product designation and the part number when
ordering spare parts.
Use only genuine BUCHI consumables and genuine spare parts for maintenance and repair to assure
good system performance and reliability. Any modifications to the spare parts used are only allowed
with the prior written permission of the manufacturer.
Table 10-1: Spare parts
Product Order number
Plastic funnel 51167
Beaker pliers, 50 mm 02004
Turix wrench 44349
Pliers for glass sample tubes with frit 47609
Hose adapter for cooling media input 49151
Hose coupling (wide and small) 43565
Hose clamp 28737
Cooling water hose complete, G3/4”, G1/2”, L = 1.5 m 37780
Hose, silicone Ø 6/9, L = 1.5 m 43940
Solvent hose, Tygon SE 200 49450
PTFE hose 500 mm 25315
Knurled screw (for solvent hose) 43237
Clamping ring (for solvent hose) 43238
Condenser connection hose, silicone, L = 0.35 m 49161
Condenser hose, silicone, L = 0.20 m 49163
Set of holders for glass sample tubes with frits, set of 6 pieces 49432
Set of holders for paper thimbles, 25 x 100 mm, 6 pieces 49428
Set of holders for paper thimbles, 33 x 94 mm, 6 pieces 49429
Holder for 6 beakers (for E-816) 47643
Set of beakers Hot Extraction, 2 pieces 49426
Set of beakers Hot Extraction, 12 pieces 45674
Condenser complete, including connector, straight 47604
Protective shield E-816 HE 45521
Protective shield E-812 HE 45522
Set of seals, Viton, 2 pieces 49431
Holder for glass sample tubes, micro-wavable, 6 positions, PTFE 49424
Sound absorber 15641
Chiller connection set 11058415
IQ/OQ-set E-812/816 HE 45658