User's Manual

Dip Switch Table for MMC RF Board
Switch 3 is the Motor Direction Selector.
If Switch 3 is ON = action is “Open is Open” and “Close is Close”
If Switch 3 is OFF = action is “Open is Close” and “Close is Open”
off Maintained Action
on 1 1 1 Open is Open
1 2 3 Close is Close
off 1 Maintained Action
on 1 1 Open is Close
1 2 3 Close is Open
off 1 Momentary to Maintained
on 1 1 Open is Open
1 2 3 Close is Close
off 1 1
Momentary to
Maintained Action
on 1 Open is Close
1 2 3 Close is Open
off 1 Momentary
on 1 1 Open is Open
1 2 3 Close is Close
off 1 1 Momentary Action
on 1 Open is Close
1 2 3 Close is Open
off 1 1 Momentary
on 1 Open is Open
1 2 3 Close is Close
off 1 1 1 Momentary Action
on Open is Close
1 2 3 Close is Open
* NOTE: Key Fob and 10 Channel Transmitter are always Maintained Action no matter
where the switches are located.
If Switch 1 & 2 are ON = action is Maintained on Switch and Key Fob.
If Switch 1 is ON & Switch 2 is OFF = action is Momemtary to Maintained for switches only, Key Fob is
Maintained.
If Switch 1 is OFF & Switch 2 if ON = action is Momentary on Switch, Key Fob is Maintained only.
If Switch 1 is OFF & Switch 2 is OFF = action is Momentary on Switches only, Key Fob is Maintained only.