User guide and terms of guarantee
CONTENTS CONTENTS............................................................................................................................................................................................................................................................... 2 A. Type of use...............................................................................................................................................................................................................................
A. Type of use There are many different kinds of bikes, designed for a variety of purposes which are outlined below. Failure to use your bike in accordance with the recommendations detailed below may result in damages and accidents. Town and leisure bike Bikes for small children All terrain bikes Racing bikes Bikes designed for use on public roads (roads, cycle routes and paths). These bikes are not designed for "all terrain" use nor for competitions.
Insert seat post into seat tube. Adjust height of seat tube in accordance with user height. The minimum insertion marker must never be visible above the seat tube. To determine the correct seat height, sit on the bike and place your heel on the pedal in the lowest position with the crank parallel to the seat post. The seat is the correct height when your leg is fully extended. - How to measure and adjust height of handlebars to suit user (see chart at end of instructions). Insert stem into pivot tube.
4/ Check that the V-Brake or Cantilever calipers are symmetrical. Check that the “left and right” caliper return springs are balanced as illustrated below: SIDE PULL ALUMINIUM TUBE CABLE SCREWDRIVER LESS TENSION TENSION SPRING ADJUSTING SCREW SYMMETRICAL SPACE NUT PULL THE CABLE MORE TENSION CANTILEVER HANGER BOLT HANGER 5/ Adjusting cable tension The case of V-Brake or Cantilever or Roller Brake type brakes.
D. Adjusting suspension Refer to the component manufacturer's recommendations on adjusting forks and suspension which can be found on www.btwin.com. For specific information about the NEUF system, visit www.btwin.com. Warning:The suspension fork and shock absorbers must never be dismantled by the user. This procedure must be carried out by a qualified mechanic. E. Bike safety guidelines For your safety, it is recommended that you wear a helmet and use protective equipment and or/signaling devices.
Type of bike Stem/ Handlebar Child (12’’) Stem/Fork Seat/Seat post Seat post/Frame 14 Child (14’’ & 16’’) Junior (20’’ & 24’’) BMX Town and country* 3 5 7 Recreational mountain bike City (Elops) 20 Not applicable Not applicable 20 Not applicable 1 screw 18 1 screw 21 22 2 screws 12 2 screws 12 16 or pivotal 10 10 system 6 1 screw 18 1 screw 18 2 screws 12 18 2 screws 14 4 screws 7 16 18 24 13 22 17 7 7 17 RR 5.
K. Attaching non-mounted components that come with the bike. All our bikes are assembled in accordance with national legislation. Non-mounted components that come with the bike need to be attached by a qualified and experienced mechanic. For BMX bikes, you need to contact a qualified mechanic to ensure that the pegs are correctly installed. The adjusting screw supplied can be used to: - Fit or dismantle the gears - Adjust the handlebars - Adjust the seat - Fit or dismantle the wheels. L.
The procedure for changing gears is as follows: Changing gear: continue to pedal but not too hard and move the gear shifter (lever or rotating handle) until the chain is positioned on the selected chain ring or cog. Each lever position corresponds to a different cog. • If the chain has a tendency to slip off the cog: you can try "overshifting" by gently pushing the lever slightly beyond current position without moving to the next position.
R. Maintenance of wheel rims As with all wear pieces, the rim must be checked regularly. If you notice anything strange (unusual wear or any warping) have your bike checked by a qualified and experienced mechanic. If your wheel rims show signs of wear, check and if necessary replace them. Reduced wall thickness may lead to tyre defects and cause injury S.
TOWN AND COUNTRY The following table will help you determine the optimum riding position S(cm) relative to your size. Original Elops S (cm) Hs (cm) 55.5 160-164 62 58 165-169 64.5 170-174 66.5 175-179 69 S (cm) Hs (cm) 155-159 160-164 h (cm) h (cm) +7 165-169 60 170-174 62.5 175-179 64.5 180-185 72 180-184 67 - - - 185-190 69.5 - - - +12 +6.
GUARANTEE CHARTER The guarantee covers: • Any equipment or manufacturing defect observed by a B'Twin workshop team, the replacement of defective parts with compliant parts for the same use, and labour. • All " b’Twin " branded products are guaranteed for 2 years unless otherwise indicated and in normal and recommended conditions of use. • This B’Twin guarantee presents no obstacle to the application of the legal guarantee against latent defects.
Your bike must be fitted lights which are an important safety feature. Before setting off, check that your lights are working and that your batteries have sufficient charge. Used batteries contain metal which is harmful to the environment (Hg: mercury, CD: Cadmium, Pb: Lead): They may be taken to our shops and disposed of correctly; do not throw them out with domestic waste. The batteries should be collected separately.
Importado para Brasil por IGUASPORT Ltda. CNPJ : 02.314.041/0001-88 TURKSPORT Spor Urünleri Sanayi ve Ticaret Ltd.Şti Mega Center C 36 Blok D: 374 Bayrampaşa - 34235 Istanbul - Turkey Импортер: ООО «Октоблу», 141031, Россия, Московская область, Мытищинский район, МКАД 84-й км., ТПЗ «Алтуфьево», владение 3, строение 3 16” : GB 14746 - ≥ 20” : GB 3565 OXYLANE 4, boulevard de Mons - BP 299 59665 Villeneuve d’Ascq cedex - France btwin.
