User manual

43
Part 5
Using Plusdeck2c
42
www.plusdeck.com
●
A-3(Auto Cut) One file option generates an entire tape in one file. Files option
splits the tracks and creates each track as a separate file. It is not
recommended to use Files option for the tape with voice recording
because it can create numerous files as it cuts wherever there is
no sound.
3
A-2(Type) specifies file format
① Wave is a Windows native file format which requires a large storage space
② Mp3 is a compressed file format which requires a less storage space. The number
following Mp3 indicates bit rate. The higher the number is, the better the sound
quality is. Mp3 64 option is recommended for converting voice and mp3 64 or
higher for converting music.
③ The table below shows the file size comparison table between wave and various
mp3 bit rate file format.
( The number of after mp3 is bitrate. The size of file is approximation. )
A-1
A-2
A-3
①②③ ④ ⑤
A-1
A-2
A-3
①②③ ④ ⑤
Why converting can be done only in real time
High speed recording between different medium can
not be done at this point due to the speed error
problem.
Recommended option
When using Files option, the number of created files differ from soundcard to
soundcard as input level values depend on soundcard. So Line In level in Recording
Control window should be adjusted for Files option to improve.
Note
The file setting will not change once it is set.
Note
Sorts of file Capacity for 1 min Sorts of file Capacity for 1 min
Wave 10MB Mp3 64 0.5MB
Mp3 256 2MB Mp3 32 0.25MB
Mp3 192 1.5MB Mp3 16 0.125MB
Mp3 128 1MB Mp3 8 0.063MB