Installation Guide

ManualsBrandsBTMWAY ManualsMetal Sheds6 ft. W x 4 ft. D Galvanized Steel Outdoor Metal Storage Shed with Double Doors for Patio, Garden, Backyard (24 sq. ft.)

35

[W2] x 1 [S3] x 10 [S4] x 10

ROOF PANELS

[W2]-3

Right Wall

DOOR

Two things in this step need special attention.

1. stacking of this [W2] in the middle, aka

[W2]-3. [W2]-3 needs to be stacked un-

der [W2]-2, because [W2] -3 has an L

channel on its right edge. [W2] -3 could

be stacked under or above [W1] -1 be-

cause in this case two U channels are

being stacked.

2. Screws. Ten screws will be used in this

step, four for nailing [W2] to [H1]/[B3]

and six for roof panel sticking through

screw holes on the ribs. However, there

are ten screw holes on the rib, meaning

four of them are not used. The two pic-

tures on the left illustrate which screws

are not used in this step.

[W2]-2[W1]-1

We will be using [W1] -1 to refer to the [W1] that is nailed ﬁrst.