Installation Guide

26
[S4] x 8 [SL] x 2 [SR] x 2 [J1] x 4 [J2] x 4[S1]+[S2] x 12
Triangular Panels
[J2]
[SR]
[SL]
[J2]
[J1] x 2
Starting from Step 3.1 you will be using [S1] and [S2],
a bolt and nut set. [S4] is still needed for [S1] that
contacts the panels.
Notice that there are four screw holes at the edge of
[SL] and [SR]. Use the lower two for [J1] .