Installation Guide

20
WALL PANELS
GENERAL RULES: Single Wall Panel Nailing
In step 2.1 there is a section called COMMON MISTAKE: Screw Holes on the Outer Base(D1+D2+D3+D4) .
Read that section first.
As stated before, a wall panel has no assigned top/bottom end. It ’s up to
you to decide which end is the top or bottom. Once you have made the
decision, follow the rules below.
1. Start from the screw holes at the bottom end.
2. At each end, start from the peripheral screw holes and move to the
screw hole in the middle.
Take the [Q3] on the left for example, ①~⑩ is the correct order of fixing
screw holes.
These rules might sound arbitrary but they are necessary.