Installation Guide
Table Of Contents
14
[Q2] x 4 [S3] x 8[S4] x 8
[Q2]
DOOR
[Q2] [Q2]
COMMON MISTAKE: [Q2]
A [Q2] has four screw holes on each of its ends. In step [2.1], only screw holes
No. 2 and No. 3 of each [Q2] are used. No. 1 and No. 4 will be used in following
steps.
Also, pay special attention to the orientation of [Q2]. It is the side with three
screw holes that is facing the door and back.










