Installation Guide

13
WALL PANELS
GENERAL RULES: Wall Panels
Remove the protective films first
[Q1] x 3 [Q2] x 4 [Q3] x 4
Starting from Step 2.1, you will be using [S3] together with [S4]. [S4] is useful
for protecting the punched screw holes from getting rusty. So use them.
These are the wall panels you will be using.
Wall Panels, except for [Q2], are symmetrical, meaning they don ’t have
assigned top/bottom, or left/right. But they do have exterior and interior,
with the exterior ’s color being the color of the shed and the interior ’s color a
universal light grey.
[Q2] does have a difference between its left and right, but no difference
between its top and bottom.
[S4] [S3]
COMMON MISTAKE: Screw Holes on the Outer Base(D1+D2+D3+D4)
There are screw holes on both the base frames and the wall panels. It is self -explanatory that you need to nail the wall panels to the base frames
using the screws ([S3]+[S4]). However, since the base frames are made of aluminum, a soft yet ductile metal, you can easily d ril l the screws into
the base frames without the screws going into the correct screw holes. So, when assembling wall panels, bend the panels a li ttl e bit and see to it
that the screw is going into the screw hole.
Screw Hole