Installation Guide

35
[W2] x 1 [S3] x 7 [S4] x 7
ROOF PANELS 3
BACK
L-Channel
[W2]
Some key points:
1. Place the [W2]-3 so that the L-channel points to the right wall (not your right hand) of the shed. This [W2]-3 is placed under the [W2]-1.
–1, -2, -3 indicates the order of roof panel.
2. Seven sets of [S3]+[S4] are used, four sets for nailing [W1] and three for roof panel stacking. The top two sets are the most important
and should be xed rst. The ve screws holes left can be xed in whatever order.
3. The screw holes on the very edge of the ribs are not used in this step.
Not used
Used
Used
Not Used
Right Wall
Left Wall
[W2]-1
BACK
[W2]-2[W2]-3