Installation Guide

13
GENERAL RULES
Wall Panel Stacking
Starting from Step 2.2 you will be stacking panels. These general rules apply to wall panels only. Stacking of
roof panels will be talked about later.
The picture above illustrate how two wall panels are stacked together, from a top to bottom perspective, out-
side the shed. As you can see, only one channel of each wall panel is stacked. It makes no dierence which
panel is on top.
[Q3]
[Q3]
[Q3] [Q3]
COMMON MISTAKE: Extra Overlap
If you had an unlimited supply of wall panels you could create large overlap as you see t. But you don’t. So,
do not create extra overlap like this.