User's Manual

mBSC2500U-005-RUCM11
MBSC2500U-005-RUCM11 April 15, 2013
Figure 42- FIU Optical Power Levels
Check optical power levels at the Remote Node as follows:
1. Click on the RTM in the topology diagram and the component window will pop up on the right as
shown in Figure 43- RTM Optical Power Levels.
2. Optical Transceiver 1 Tx Power:
the output power of the RTM 1 to the fiber.
a. Nominal value is: +4.0 dBm +/-1.5 dB (impacted by temperature)
3. Optical Transceiver 1 Rx Power:
the input power of the RTM from the fiber.
a. Acceptable range is: -15 dBm ~ +6dBm (impacted by fiber loss)
Figure 43- RTM Optical Power Levels
5.3.2.3 Verify Software Versions
Click on Help in the upper right corner to verify the software version of the EMS Local GUI.
Page 53