User's Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 System Overview and Unit Description
- 3.1 System Overview
- 3.2 Host Unit Description
- 3.3 Remote Node Description
- 4 System Installation
- 4.1 Unpacking and Inspection
- 4.2 Installation Preparation
- 4.3 Host Unit Installation
- 4.4 Remote Node Installation
- 4.5 Installation Final Inspection
- 4.6 System Test
- 5.1 Accessing EMS Local GUI
- 5.2 Navigating the EMS Local GUI
- 5.3 Installation & Configuration
- 5.4 System Tuning
- 5.5 Monitoring and Alarms
- 5.6 System Upgrade
- 6 Maintenance
- 7 Terms, Acronyms & Abbreviations
- 8 Packing List
mBSC2500L-005-RUCM11
©1999-2013 Bravo Tech Inc.
4.2.6 Lightning Protecting and Grounding 26
4.3 HOST UNIT INSTALLATION 27
4.3.1 Rack Mounting 27
4.3.2 Cable Connections 28
4.4 REMOTE NODE INSTALLATION 33
4.4.1 Cable Connections 33
4.5 INSTALLATION FINAL INSPECTION 37
4.5.1 Host Unit Connection Overview 38
4.5.2 Remote Node Connection Overview 39
4.5.3 mBSC-C Inspection Checklist 40
4.5.4 Cabling Inspection 40
4.6 SYSTEM TEST 40
5 SYSTEM MONITORING &CONFIGURATION 42
5.1 ACCESSING EMS LOCAL GUI 42
5.1.1 Using Ethernet Port 42
5.1.2 Using USB Port 43
5.1.3 Login to EMS Local GUI 44
5.2 NAVIGATING THE EMS LOCAL GUI 46
5.2.1 Topology Tool Bar 47
5.2.2 Upgrade/Password Functions 48
5.3 INSTALLATION & CONFIGURATION 48
5.3.1 Network & Communications 48
5.3.2 System Installation 50
5.3.3 Alarms 55
5.4 SYSTEM TUNING 57
5.4.1 BTS Signal Conditioning 57
5.4.2 Set Downlink Gain 57
5.4.3 Set Uplink Gain 60
5.4.4 Link Verification 62
5.5 MONITORING AND ALARMS 64
5.5.1 Operational Status 64
5.5.2 System Alarms 66
5.6 SYSTEM UPGRADE 67
5.6.1 Verify Software Versions 67
5.6.2 Upgrade component software 67
6 MAINTENANCE 68