User's Manual

mBSC DAS System
Installation Manual Issue 3
©2009‐2011,BTIPage82
Figure 5-17 Adding Master Remote Unit
5.2.6 Add a Slave Remote
To complete the system activation, Slave Remote Units should be added to the system. The alpha-
numeric text fields accept any user-defined descriptive RU Caption (20 alpha-numeric character limit) and
RU No. (1 through 9999 numeric limit). The following steps provide the Remote Unit configuration:
7. Click on the new HU in the System Net section.
8. Click on Equipment to bring up the new information section for the DAS System equipment.
9. Click on RU in the Select Equipment section.
10.Select the Slot No. for the Slave Remote Unit. (This should match the Master RU configuration).
11.Select the Fiber value.
12.Select the Type of Remote Unit.
13.NMS creates a default name based on the chosen slot, fiber and type values selected as shown in
Figure 5-18. Modify the Remote Unit Caption with a customer designated name, if desired.
14.Verify that the Site Caption, Site Code and HU No. are correct for the Remote Unit being added.
15.Click Add.