User's Manual

mBSC DAS System
Installation Manual Issue 3
©2009‐2011,BTIPage81
Figure 5-16. Confirm IP Address Update Accepted.
5.2.5 Add a Master Remote
Once the Site Caption, Site Code, and Host Unit have been configured, the Master Remote Unit should
be added to the system. The alpha-numeric text fields accept any user-defined descriptive RU Caption
(20 alpha-numeric character limit) and RU No. (1 through 9999 numeric limit). The following steps provide
the Remote Unit configuration:
1. Click on the new HU in the System Net section.
2. Click on Equipment to bring up the new information section for the DAS System equipment.
3. Click on RU in the Select Equipment section.
4. Select the Slot No. for the Master Remote Unit. (This is generally Slot 2).
5. Select the Fiber value.
6. Select the Type of Remote Unit.
7. NMS creates a default name based on the chosen slot, fiber and type values selected as shown in
Figure 5-17. Modify the Remote Unit Caption with a customer designated name, if desired.
8. Verify that the Site Caption, Site Code and HU No. are correct for the Remote Unit being added
9. Click Add.