User's Manual

mBSC DAS System
Installation Manual Issue 3
©2009‐2011,BTIPage71
Figure 5-6. BTI Example System Configuration
5.2.1 Add a Site
The highest level of system configuration is defined by adding a Site Caption and a Site Code. The alpha-
numeric text fields accept any user-defined descriptive name (30 alpha-numeric character limit) and site
code (1 through 9999 numeric limit). The following steps are used to add the Site Caption and Site code:
1. Access the Network Config screen, Figure 5-5, via the NetConfig Command bar button or the
Network(N) menu drop-down.
2. Click on the Site button in the Select Information field, Figure 5-7.
3. Enter the Site name and the Site code. The example, BTI_Example_Cypress_Site is shown in Figure
5-8.
4. Click Add to save the Site Caption and Site Code.