User's Manual
mBSC DAS System
Installation Manual Issue 3
©2009‐2011,BTIPage18
Label Name Description
ANT Interface port for Antenna Feed line
OPERATE
LED indicator for normal or critical fault status of the RU.
Normal: Green ON, Critical fault: Red ON
TX_Out
RX_In
RF output port to provide the input signal to the Slave Remote Unit when Dual
or Triple Band application is configured.
RF input port to provide the output signal to the Master Remote Unit when Dual
or Triple Band application is configured.
FIBER Fiber Optic Cable interface port for combined downlink and uplink signal
POWER Interface port for the AC 110/220V power cable
DC_FAN Provides power to the fan
VENT Port for the balance of pressure inside and outside of the enclosure
Label Name Description
ANT Interface port for Antenna Feed line
OPERATE
LED indicator for normal or critical fault status of the RU.
Normal: Green ON, Critical fault: Red ON
•
SLAVE Remote Unit:
•
No Fiber Optic Cable connection with the Host Unit
•
Interfaces with the Master Unit for downlink and uplink signal
•
Unused ports (TX_OUT, RX_IN) are blocked with a cover.
Figure 3-8. User Interface of MASTER Remote Unit
Table -3-3. Master Remote Unit User Interface
Figure 3-9. User Interface of SLAVE Remote Unit
Table -3-4. Slave Remote Unit User Interface