User's Manual
mBSC DAS System
Installation Manual Issue 3
©2009‐2011,BTIPage22
installation. Table 4-2 lists the mounting hardware provided by the manufacturer for a BTI non-custom
pole mount installation kit. Additional hardware may be needed, depending on the site requirements, and
may be ordered through Customer Service (Section 6).
Table 4-2. Single-Band RU Mounting Hardware and Fasteners
for a BTI non-custom pole mount installation kit
Hardware and Fasteners Quantity Rec'd
MOUNTING PANEL
(Configurable)
1
I-BEAM or U-BEAM/CHANNEL
MOUNTING BRACKETS
2
SHROUD COVER 1
M5 SCREW 8
M5 LOCK WASHER 8
M5 FLAT WASHER 8
M6 SCREW 8
M6 LOCK WASHER 8
M6 FLAT WASHER 8
M8 SCREW 8
M8 LOCK WASHER 8
M8 FLAT WASHER 8
M12 SCREW 4
M12 LOCK WASHER 4
M12 FLAT WASHER 4
JUNCTION BOX 1
RF CABLE (Designated Slave Unit) 2
FIBER OPTIC COWL 1
POWER CABLE (10 FEET) 1
FAN CONNECTOR (OPTIONAL) 1
Table 4-3. Specified Hardware Torque
Type Screws Hex Nuts Spacers
Spring/Lock Washers
Spacers
Flat Washers
Thread M5 M8 M12 M5 M8 M12 M5 M8 M12
Specified
Torques
(lb. - ft.)
2 12 40 2 12 40 2 12 40
The following is a list of tools and any additional materials required for mounting every Single-Band
Remote Unit configuration:
• DIN male connectors
• Tool kit for attaching DIN connectors to coaxial cable
• Tools for installing exterior AC circuit
• Tools for securing M5 screw