User's Manual

MBSC0800-040-RU
MBSC0800-040-RU April 15, 2013
Page 66
14

415510 PALoopAlarm Errorcorrect ionloopunlocked
15 400310 PAVoltageAlarm PAvoltageoutsiderange
16 401300 PAFaultAlarm InternalPAfaultdetected
17 SSM 401000 UplinkLNAFaultAlarm InternalLNAfaultdetected
18
FAN
408301 Fan1Alarm Fan1isnon‐functioning(lowcurrent)
19 408302 Fan2Alarm Fan2isnon‐functioning(lowcurrent)
5.6 System Upgrade
To conduct a system upgrade, navigate to the upper right section and click on “Upgrade”.
5.6.1 Verify Software Versions
Verify component versions in the second column of the Upgrade tab.
5.6.2 Upgrade component software
Click on the “Upgrade” button and locate the firmware file to start the component upgrade. Note: Each
component upgrade time differs from one another ranging from 5 minutes to 120 minutes.
Figure 55 - Component Upgrade