User's Manual

Table Of Contents

mBSC-H DAS System

Installation Manual Issue 7

 Wire cutters

 Wire Stripper

 Open End Wrench 1.25 inch/33mm (used for DIN connector)

 Hex Wrench 5mm (M6 screw)

 SAE Wrench 5/16 inch/8mm (the Slave Remote Unit connectors)

4.2.3 Unpacking And Inspection

This section provides the instruction for receiving the equipment shipment, verifying all parts have been

received and checking that no damage has occurred during transportation. The Remote Unit includes the

following items:

 Remote Unit(s)

 Hardware and Fasteners described in Table 4-2, Section 4.2.2

Use the following procedure to unpack and inspect the Remote Unit and accessories:

1. Open the shipping container, Figure 4-1 and carefully remove any accessories from the protective

packing material, Figure 4-2.

Figure 4-1. Open the Shipping Container Figure 4-2. Remove Accessories

2. Remove the Shroud from the Remote Units(s), Figure 4-3.

Figure 4-3. Remove the Shroud