Users Manual Part 2

CP880+CR650
65
3. Enter the domain name in the Target IP or domain field. For example, www.google.com.
4. Set Maximum hops ad Timeout.
5. Click Traceroute. As shown in Figure 5-72
Wait until the traceroute command is executed. The execution results are displayed in the Results
box.
Figure 5-72
5.7.7 Port Mirror
Port mirroring is used on a network switch to send a copy of network packets seen on one
switch port. To do so:
1. Choose System>Port Mirror.
2. Enable Port Mirror.
3. Select the WAN Interface which you want a copy.
4. Type the Monitor IP, where the copy will send to.
5. Click Submit. As shown in Figure 5-73.